How to Install a Chain Link Fence-Step 11-14

Step 11 Insert a Tension Bar Without releasing the fence puller, insert a tension bar in the mesh close enough so it can be fastened to the tension bands on the end post nearest the fence puller. To remove the excess mesh between the tension bars and end post, open a loop at the top and bottom, then twist and pull the strand free. Step 12. Attach the Tension Bar Pull the tension bar into the tension bands on the end post by hand, and then tighten the bolts on the bands with a socket wrench. Release the fence puller and remove the pull bar to which it was attached. Repeat the entire hanging and stretching process along the remaining sides of the fence. Step 13 Tie the Fence to the Rails Bend one end of an aluminum tie wire into a hook and grab the bottom strand of the opening above the rail. Loop the tie wire around the top rail, pull it firmly and tie it back onto the mesh. Space the tie wires every 12 to 16 inches along the rail and then attach them to the line posts. Step 14 Thread a tension wire through the bottom loops of the mesh and tighten it around the end posts. Wrap the wire around itself several times to fasten it. An alternative to threading the wire is to attach it to the mesh every 2 feet or so with hog rings. Sunway wire mesh- Your reliable wire mesh supplier in China